Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to calculate data transfer rate for video capture card?

Status
Not open for further replies.

IndiJones

Full Member level 2
Joined
Aug 13, 2001
Messages
132
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
786
video capture transfer rate

I need to capture live video feed from a 4MPixel/Frame, 30Frames/sec, 16bits/pixel high resolution camera and for that I need to know what the data transfer rate of the video capture card should be. Multiplying 4*30*16 becomes 1.9Gbits/sec. Does this mean that I should use a 1.9Gbits/sec capture card? Since 1 Byte=8 bits, 1.9Gbits/sec becomes 240MBytes/sec. Capture card transfer rates are specified in MB/sec. I'm not sure whether it's MBytes or MBits. I would appreciate it very much if someone could help me figure out the way to calculate the required capacity of the capture card. Thanks!
 

I think that the camera is sending the video compresses using MPEG-2 so it is much lower bit rate than this that you compute
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top