Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to caculate input sensitivity?

Status
Not open for further replies.
M

mastericke

Newbie level 6
Joined
Jun 25, 2009
Messages
11
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Location
china
Activity points
1,339
input sensitivity

When i read about input sensitivity in Section2.4 of RF microelctronics(RAZAVI),
i am confused about input sensitivity caculation.

If a SNR of 8dB in a bandwidth of 200kHz is required, and the total NF is 4dB, so how to caculate the input sensitivity is about -109dBm?
 

input sensitiv*

-174dBm+10*lg200000+8+4

noise floor, band width, SNR, NF
 

input sensitivity +4db and -10db

hi, yubingz
the result of the eqution that you give is -147dBm, not -109dBm.
This question is in th e first page of chapter6 in RF electronics(Razavi).
what's the problem?

thx!!!
 

what is input sensitivity

See below:
 

    M

    mastericke

    Points: 2
    Helpful Answer Positive Rating
input sensitivit

calculate it carefully
 

    M

    mastericke

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top