Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to assign pins manually in Xilinx FPGA using ISE 5.2?

Status
Not open for further replies.

ashishjindal76

Member level 4
Joined
Dec 5, 2003
Messages
78
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
779
fpga

hi all
i want help regarding how to assigns pins manually in Xilinx fpga use ISE 5.2 pack

thanks
 

fpga

Hi,

You'll have to first select the menu, the one which you use for creating new VHDL source code or test bench, there you should see something like Constraint File or something in relation to that...

Then once this process is done,, on the left hand side where you see menu's for design such as Implementation (Translate , Mapping , PAR ) and Generate Programming File over there only I think it's the first optionand under its sub section u can select "Pin Constraint Editor" then you should see a graphical user interface where you can allocate pins manually and allocate various other things as well..

Hope it helps

Sanjay
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top