Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to answer this question.

Status
Not open for further replies.

sagar474

Full Member level 5
Joined
Oct 18, 2009
Messages
285
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,318
Location
India,kakinada
Activity points
3,122
in cellular systems.
What is the difference between interface and protocol?
how to answer this question in exams.
 
Last edited:

GPRS Core Network - Wikipedia, the free encyclopedia

GPRS tunnelling protocol is the defining IP-based protocol of the GPRS core network. Primarily it is the protocol which allows end users of a GSM or WCDMA network to move from place to place while continuing to connect to the Internet as if from one location at the Gateway GPRS Support Node (GGSN). It does this by carrying the subscriber's data from the subscriber's current Serving GPRS Support Node (SGSN) to the GGSN which is handling the subscriber's session. Three forms of GTP are used by the GPRS core network
Reference points and interfacesWithin the GPRS core network standards there are a number of interfaces and reference points (logical points of connection which probably share a common physical connection with other reference points).

ALL ABOUT WIRELESS TELECOMMUNICATION: Interfaces and Protocols
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top