How to add PSPICE model in PSPICE

[AtMega32]

Can someone tell me how to add PSPICE Model in PSPICE software.

i have downloaded one PSPICE model from "LM239" from texas instrument site, the file they are providing is "LM239.5_1"

https://www.ti.com/product/lm239

 

[keith1200rs]

These are old models where they have different models for different voltages. So, you will see models like 5_1, 10_1, 5_2 etc depending on whether they run on a single or dual supply and how many supply rails there are; single or dual. That model is intended for 5V single supply operation. You can change the extension if you like to .lib or whatever you need.

Keith

 

[AtMega32]

keith1200rs:thanks buddy for that info,
i have downloaded that file, changed it to .lib and then tried crating library by following this tutorial
https://www.ti.com/lit/an/sloa070/sloa070.pdf

but when using this in circuit, while simulation i am getting error message saying
ERROR(ORPSIM-15108): Subcircuit LM741/NS used by X_U5 is undefined

i have put the created library and model file (.lib and .olb) file in proteus/library and also in captutre/library/proteus/ folder.
and have also added the file as global, in simulation setting.
could you please help me if i am missing something