Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How the AXI Interconnect works

Status
Not open for further replies.

somaja

Newbie level 1
Joined
Jan 8, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
axi interconnect

Hi,

I'm working on SOCC verification of RAID controller.I've PCIe Core- AXI Bridge on chip.The transactions initiated from PCIe core goes through the AXI Master to AXI Interconnect, to which multiple masters and slaves are connected.

In our design , PCIe Core can issue 8 outstanding read and writes.
But one of the slaves connected to the AXI Interconnect doesn't support the outstanding (No support for different AWID/WID's)

Are the outstanding transactions of PCIe Core would be stored in internal buffers and will be isssued one by one by the master?If so, is the responsibility of the AXI Interconnect to make the master to issue the bursts with single ID?Here the decoding will be done based on Address.

Can anyone please clarify on this?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top