Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How is coplanar stripline fed in HFSS

Status
Not open for further replies.
R

raks123

Newbie level 1
Newbie level 1
Joined
Aug 28, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,287
I am using HFSS for simulating patch antennas (without ground planes). A center strip with two adjacent ground strips together constitutes feeding end of the antenna structure. Practically this antenna will be fed by a coax, center pin of coax connected to center strip of the antenna and ground strips coming in contact with coax's outer conductor through SMA jack. I don't know how to feed coplanar(three strip) structure in HFSS. Please help me out. It's urgent.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top