Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[General] how i use gate drive ir2110 or ir2112?. help

Status
Not open for further replies.

iosman001

Newbie level 1
Joined
May 13, 2020
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hello,

I am trying to dirve four mosfet with a microcontroller so i can implement PWM on a dc motor. i am using atmega16 and the dc motor is 12v. i have IR2112 or ir2110 to drive them. i have no idea on how use the IR2112 driver. can some1 please enlighten me with a schematic? so i know which pin is used for what purpose. i dont have time to do all searching about it .

thanks
iosman
 

KlausST

Super Moderator
Staff member
Joined
Apr 17, 2014
Messages
23,015
Helped
4,715
Reputation
9,446
Reaction score
5,085
Trophy points
1,393
Activity points
152,474
Hi,

the datasheet tells you all you need.

Additionally there are countless threads here about IR21xx and how to drive MOSFETs.
And even more in the internet. Millions I assume. And almost every single one should tell the basics. No need to find a special one.

And the manufacturer provides additional inofrmations like application notes, design note, evaluation boards, design examples.

I really dot know how to help you with your quite general question.


Maybe you should ask a more detailed question ... and the same time give all your requirements...please in one post.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top