Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HOW I CAN BUILT MY OWN SERIAL LCD

Status
Not open for further replies.

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,190
Helped
248
Reputation
496
Reaction score
202
Trophy points
1,343
Location
East Of Earth
Activity points
8,933
HI,

I need help about how i can built my own serial lcd on pic 16f84 with
following spec baud rate selectable between 9600 and 2400 and lcd type selectable between 1 line and 2 line

regards
fragrance
 

Hi,

This code should give you some idea how to build your serial LCD. I took it from a book: " Experimenting with Picbasic Pro" by Les Johnson.

HTH
 

Is there any one for Samsung KS0108B Controller (GLCD 128x64)?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top