How do I enable the ZDA NMEA message?

john2053 · Feb 7, 2022

I am using the u_blox8_M8 module GPS Antenna and getting the message in other forms but I want to get the ZDA structure message so that I could display it in LCD?How can I do that?

doraemon · Feb 7, 2022

Hello!

A good start is to read what has been written on the subject. You can read the ZDA string exactly as you
can read other strings. With a bit of adaptation if you want to change GNSS to ZDA. See link below.

Have fun!

https://www.edaboard.com/threads/extract-the-date-and-time-from-gnss-gps-and-display-in-16x2-lcd.400982/#post-1726891

john2053 · Feb 7, 2022

doraemon said:
Hello!

A good start is to read what has been written on the subject. You can read the ZDA string exactly as you
can read other strings. With a bit of adaptation if you want to change GNSS to ZDA. See link below.

Have fun!

https://www.edaboard.com/threads/extract-the-date-and-time-from-gnss-gps-and-display-in-16x2-lcd.400982/#post-1726891

that was all about displaying the GPS data as it is(GNSS) extracted from the GPS module. I want to extract only in the format of ZDA so that it will be easy to display.

FvM · Feb 7, 2022

Protocol specification: "See UBX-CFG-MSG for a description of the mechanism for enabling and disabling messages."

How do I enable the ZDA NMEA message?

john2053

Newbie level 4

doraemon

Super Moderator

john2053

Newbie level 4

FvM

Super Moderator

Similar threads

How do I enable the ZDA NMEA message?

john2053

Newbie level 4

doraemon

Super Moderator

john2053

Newbie level 4

FvM

Super Moderator

Similar threads

Privacy & Transparency

Privacy & Transparency