Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How do automatic track width change in Layout Plus?

Status
Not open for further replies.

kashimonga

Junior Member level 1
Joined
Sep 8, 2005
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,427
Hi all,

As we know we may want to route a track with a width of high mils (60 mils). but some where it is needed that the track width is changed so that complete routing be possible. e.g. when it is needed to route the track between two pads of an IC. in this case we need the track width to be change to a low value (10 mils) for few length of the track and have its prefered width in other places (Such as attachment).

Is it possible to tell the Layout Plus Or SPECCTRA (Allegro) to do this auotmatically in autoroute proccess?
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top