Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How can i solve second order nonhomgeneous differential equation?

Status
Not open for further replies.

m.mohamed

Member level 1
Joined
Jul 27, 2016
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
255
I would like to solve a non-homogeneous differential equation with complex coefficient. The equation is in the form:

Unbenannt.jpg

where Jx is not a function of z and k, w, u are constants
 

\[ E_x = j \omega \mu {J_x} + A(1-cos( \sqrt{k} t) + B \sin( \sqrt{k} t) \]
 
Last edited:

Thanks for your replay Eduardo, can you send to me the method of solving?
 

My apologies for the k and z's forgotten in the previous message.


If Jx does not depend of z it can be treated as a constant in the differential equation, then the solution is the sum of one particular solution

\[E_{xp} = \frac{j \omega \mu\,J_x }{\sqrt{k}}\]

plus the solution of the homogeneous

\[E_{xh} = A\cos(\sqrt{k}z)+B\cos(\sqrt{k}z)\]


\[E_x = E_{xh} + E_{xp}\]
 

Eduardo, on your Exp there is sqr("k"). In my approach there is none.

- - - Updated - - -



a=j·w·mu·Jx
 


you mean in this case that the imaginary part of the particular solution dosn't matter, does it?
i think when the right hand side of the particular solution is complex, the method of solving will be different, is it right??


CataM, Ex is differentiated with z , so why you write the solution as a function of x?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top