Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How can I obtain the specification of IIp3 or OIP3?

Status
Not open for further replies.

Neo_82

Junior Member level 3
Joined
Apr 29, 2004
Messages
28
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
216
iip3 oip3

How can I obtein the specification of IIp3 or OIP3 from the bluetoth specification?. if you can include other linearity mesures from that information hoe is it done? thaks
 

Re: IIP3 and OIP3

There may be none. Most of this type of specification deal with spurious responses that are transmitted and it is up to you to decide how to meet it.
 

Re: IIP3 and OIP3

A company I worked for just did the BER 1e-6(or -7?) @ -70dBm.
For the TX we just did the P-1 dB.
And these spec's realy depend on your System line up.
i.e. Company A can have 2 LNA's , so they only need IIP3 of 25dBm and
Company B might have 1 LNA and a filter so they need a 45dBm IIP3.
This is just a made up case so don't assume these numbers mean anything.

Cheers
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top