Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How can I design a simple graphic card ?

Status
Not open for further replies.

goldperson2005

Junior Member level 2
Joined
Nov 8, 2011
Messages
21
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,420
How can I design a simple graphic card ?
 
Last edited:

simple - easy)))) primitive - very easy))))
what specifically are interested in?
 

simple - easy)))) primitive - very easy))))
what specifically are interested in?
just Simple

with some PCB tools.
If you give me a schematic file , I will .
I need to know how can I design its circuits .

a ttl example : Masochist's Video Card - Introduction | PyroElectro - News, Projects & Tutorials
with a pic : **broken link removed**
video signal generation : **broken link removed**
with a cpld : ELM - General purpose display controller
hope this helps !
can you please present projects that have displayed a photo from mmc ?
 
Last edited:

Didn't you get the memo? All the hip kids in town post terse descriptions of their problem and expect you to do the work.

Sorry, I meant to say their URGENT!!!!11!!!ONEONE!!! problem. halp plz!
 

can you please present projects that have displayed a photo from mmc ?

it is not easy))))
it requires a controller SD_MMC /
block in the file system (processor)
display unit of memory -> VGA
arbitter memory
 
it is not easy))))
it requires a controller SD_MMC
block in the file system (processor)
display unit of memory -> VGA
arbitter memory
yes i know
can you describe more , Please ?
 

about the video. Requires intermediate video memory. The size should match the resolution and color depth. For 1024 * 768 and 16 bit color (5-5-6) 1024 * 768 * 2 bytes. Static memory, you can connect yourself. For the dynamic - it is better to take a ready-made controller.
For this controller, if it requires one port will produce an arbitrator.

---------- Post added at 12:27 ---------- Previous post was at 12:22 ----------

The arbitrator will distribute access continuous reading from the memory of VGA DAC and record the new values ​​of the processor.
Controller sd_mmc - access device to the card. In the simplest case, this SPI controller.
The processor must read the file from the card and turn it into a sequence of bytes to write to video memory.
 
Tanks a lot it was so helpful . but I have questions :
1024*768 and 32 bit color it should be 1024*768*4 Byte : 3145728 Byte : 3072 KB : 3MB
Do you mean something like SRAM ( as a static memory) ?
Can ARM Cortex-A series be used as a processor in VGA Card ?
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top