Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how about designing a Quad band PA in one die

Status
Not open for further replies.
P

patriot

Member level 5
Joined
Nov 13, 2004
Messages
90
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
709
There are two PA dies in Most Quad band PA(GSM850,GSM900,DCS,PCS) ,one for GSM850&GSM900,the other for DCS&PCS,How about design them in one die,select respective input and output matching networks by an analog switch?
 

i think it is two amps of cover the 850 and 900 band , and the other 1800 and 1900

khouly
 

There is an isolation issue that appears if combine the two dies in one.
Second harmonic of low band arrives on high band frequencies, and there would be no rejection of it up to the antenna connector.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top