Dasco
Junior Member level 2
Hello all,
I want to be able to enable and disable memory segments with control signals.
example:
making 0x0800 0000 to 0x0900 0000 accessible with test_signal_1 == 1
how can i do that ( in verilog but VHDL is ok too) ??
thanks in advance for any reply
I want to be able to enable and disable memory segments with control signals.
example:
making 0x0800 0000 to 0x0900 0000 accessible with test_signal_1 == 1
how can i do that ( in verilog but VHDL is ok too) ??
thanks in advance for any reply