Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Home made USBasp programmer

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


Construction of this system was based on: LINK. It is a small portable programmer which can be easily hidden in a pocket and easy to made at home, so the board is one sided using iron method. The PCB was designed in Sprint_Layout, and descriptons were designed in FrontDesigner30 and printed on self-adhesive paper and glued. Housing was taken from memory card reader and was slightly finished with a file.

Pictures:



Link to original thread (useful attachment) - USBasp
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top