Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HLP Borland C++Builder 6 Parallel Port Interfacing in Win XP

Status
Not open for further replies.
A

AEL

Newbie level 4
Joined
Jan 15, 2006
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,332
parallel port builder 6

HELP me plsssssssssssssss...... I just want to send a value to the parallel port. Can u help me making a simple code! in BCB6 that can be easily understood!!!
 

There is NO simple solution in WinXP because the operating system blocks user access to I/O ports. Borland apparently acknowledged that problem, and removed I/O functions from their compiler.

See the replies to your other thread. You need to install and use a special device driver:


Also search this forum (or Google) for many similar discussions about parallel port I/O.
 

Go to beyondlogic.org and download portTalk.
This will allow you to easily write to any port on the pc.
 

    A

    AEL

    Points: 2
    Helpful Answer Positive Rating
Re: HLP Borland C++Builder 6 Parallel Port Interfacing in Wi

THANK YOU VERY MUCH ... BTBASS PORTTALK RULESSSS!!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top