High speed PCB design

[dariush]

high.-.speed.digital.design.-.johnson. .graham

Hi
I want to work on "High speed PCB design",I dont know How can I start it,I'll be happy if any one help me.
bye

 

[pisoiu]

high speed digital design johnson ebook buy

Hi,
There are a lot of e-books at "e-books upload/download". Search for high speed digital design, signal integrity. You'll need to learn issues like how to control impedance of traces between high speed digital components, how to work with power planes, how to work with diffrent types of logic families, EMI issues, ESD protection (if you want to pass international compliance tests with your design). If you want to learn how to work with high speed ECL/NECL/PECL families, go to www.onsemi.com . A lot of books and appnotes related to these families are available for download.

 

[jupitorcuu]

spectraquest

Go to mentor and Cadence's website you can find more information about High speed tools

 

[dariush]

howard pcb black magic

Hi
Can I use SpectraQuest during learning about signal integrity?

 

[div]

pcbtech.net

Hi
Can I use SpectraQuest during learning about signal integrity?

I suggest you start to use Hyperlynx from Mentor Graphics.
It is much simplier than SpectraQuest and the manul is also good.

 

[gometric]

high speed pcb design guide

One book: High Speed Digital Design from Howard Jhonson
It is very good.

Gometric

 

[mrmontreal]

high-speed pcb design master

Here are a few references:


Bogatin Eneteprises:
hxxp://www.bogent.com/Downloads_Tech.asp

Henry Ott Consultants
hxxp://www.hottconsultants.com/papers.html

Montrose Consulting:
hxxp://www.montrosecompliance.com/Technical_Papers.html

Sigrity:
hxxp://www.sigrity.com/support/techpapers/support_tech_doc.htm

Good Luck,

Monty

 

[nuderen]

High-speed Digital Design - Johnson & Graham
it is very useful!

 

[dariush]

One book: High Speed Digital Design from Howard Jhonson
It is very good.

Gometric

Hi
Do you have High Speed Digital ebook ?
dariush

 

[gometric]

One book: High Speed Digital Design from Howard Jhonson
It is very good.

Gometric

Hi
Do you have High Speed Digital ebook ?
dariush

I'm sorry I have a hard copy of it.

gometric

 

[EEHardware]

High Speed Digital Design from Howard Jhonson
may be can download from Ebook donwload/upload .

 

[dariush]

Hi
I need some information about multi layer boards,and also some famous companies which design such these boards.
dariush

 

[lguancho]

Hi, here is a design guide from a PCB house. Include guidelines for mutlilayer boards 8)

 

[iwf]

I think "black magic" is best selection of you start and advanced.

 

[skywalker]

For High Speed boards,
the - High-speed Digital Design - book are a must !

Skywalker.

 

[delay]

Before you delve into the high speed stuff you need to build up some background how we got there i.e., what are the basic issues for signal integrity, power and grounding that cause the EMI. Unless and until you do designs < 100 MHz appreciably, high speed stuff would remain a fantasy.

The books on high speed are good ones but real stuff is best learnt by doing it.

 

[fyjin]

you can download this book from this forum


This is useless. Give links !
/pisoiu

 

[Bus Master]

Hi all,

Do you consider a standard uC board with 40 MHz a high speed PCB?

 

[joelo]

https://www.cadence.com/products/si_pk_bd/highspeed_pcb_dt.aspx

The website had the point about what you want!!

 

[hock]

Hi all,

Do you consider a standard uC board with 40 MHz a high speed PCB?

emi emc has more to do with rise and fall times of the chip.
u can say that emi-emc is a trouble only if ur bus speed is above 100MHz, but modern day processors are fabricated on latest fab having small die sise and process tech. this resultes in faster turn on and turn off times. this takes u to 100 mhz band even if u are working at 40MHz

hock