Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

high gain WLAN antenna??

Status
Not open for further replies.

winglj

Full Member level 4
Joined
Feb 21, 2005
Messages
195
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,063
Hi, everyone. Do you have any idea about the high gain WLAN omni-directional antenna available in the commercial market?

It seems it is only a monopole/dipole like antenna, why its gain can be so high? Any information or reference will be welcome.
 

You don't cite the antenna you are questioning.

I suspect that the question is how can one have high gain and omnidirectional coverage?

In reality you cannot. What is generally implied is that one can narrow the elevation pattern and thus increase gain while keeping the pattern in the horizontal plane omni directional.

This can be achieved with a co-linear array of dipoles (along k or the z axis). The more dipoles the greater the gain. "Franklin" antennas are one example.
 

    winglj

    Points: 2
    Helpful Answer Positive Rating
Hi, thanks for your reply. Actually the high gain omni-directional "tube/whip" antennas I mentioned about can be found in these website:

http://www.hyperlinktech.com/web/omnidirectional_marine_antenna_hg2409um.php

http://www.hyperlinktech.com/web/hgv-2404u.php

http://www.hyperlinktech.com/web/hg2412u.php

There are more examples by just searching "high gain antenna WLAN" in google.

They look like monopole/dipole, but it must be some design inside. Any information about that will be appreciated.
 


hi winglj,

all commercial high gain antenna are achieve through lengthening the dipole antennas. you would have noticed that they are much longer than the ones you get preinstalled in your router. But there is a drawback with these high gain dipole. if you need coverage of 2 floor, the upper floor coverage will get a hit. This can be observed by the radiation pattern. So it may not solve your problem to achieve better coverage.
 

    winglj

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top