Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

High Frequency SPWM generation with PIC16F876A

Status
Not open for further replies.
J

john120

Banned
Full Member level 5
Joined
Aug 13, 2011
Messages
257
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,298
Activity points
0
Hello every body,can somebody please help me to generate the SPWM signal at high frequency (28KHz) which I have to use for controlling an H-Bridge made up by MOSFET in DC-AC Converters.

I read Tahmid's blog but the frequency of the signals Which I am generating are making the MOSFET very hot because I replaced the board which was used previously and this were operating at 28KHz,so can anybody help me to generate the SPWM with high frequency?

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top