HFSS Simulation Problem - Subtracting box and polyline sheet

[avins_123]

Hello,

I have 2 doubts

1)The ground plane - Is it always a box or a rectangle.

2) I have drawn poly line sheet cutout and a box.I want to subtract box and poly line sheet.But If I try to subtract, I get the message - "Solid blank is unaffected by tool operation.So, I make the thickness of the box zero and then subtract and the problem i solved. Is it correct to make the thickness of the box as zero and then subtract.

Regards,
Avi

 

[zhul3]

Re: HFSS Simulation Problem - Subtracting box and polyline s

Hello,

I have 2 doubts

1)The ground plane - Is it always a box or a rectangle.

2) I have drawn poly line sheet cutout and a box.I want to subtract box and poly line sheet.But If I try to subtract, I get the message - "Solid blank is unaffected by tool operation.So, I make the thickness of the box zero and then subtract and the problem i solved. Is it correct to make the thickness of the box as zero and then subtract.

Regards,
Avi

1. I think it doesn't matter to either using box or rectangular sheet as ground plane, in case you make sure it has full perfect_E boundaries, as well as µ and ε=1. The thickness doesn't matter.

2. in hfss, you can either doing "box-box" or " sheet-sheet". "box-sheet" is not allowed. box with a 0 thickness=sheet.

 

[sarmad0107]

Hi

I am also facing same problem. I can not subtract a polyline from a box.
can anyone please suggest what should be done in this case when I want to subtract a polyline structure from a box ?

Thanks!