Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HFSS Meshing properties: Number of Nodes

Status
Not open for further replies.

Guruditya Sinha

Junior Member level 2
Joined
Jan 11, 2011
Messages
24
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,473
Hi,

Scenario: I am acquainted with setup of number of passes and number of modes for the simulation on HFSS, apart from the other properties setup initially.

Query:
Should I define/change the number of nodes also in the HFSS analysis setup? My usage is for antenna designing.

Thanks
 

Hi,

Scenario: I am acquainted with setup of number of passes and number of modes for the simulation on HFSS, apart from the other properties setup initially.

Query:
Should I define/change the number of nodes also in the HFSS analysis setup? My usage is for antenna designing.

Thanks

Number of nodes or number of modes? In heading you have written "nodes" and in scenario u hv written "modes"..
By the way, where are you changing the number of nodes? (assuming you meant "nodes")..In HFSS 14, mesh operations tab allows you to restrict the number of elements but not nodes..So I might be missing out on something, if you can clarify.
 

Hi Catherine,

You are right. My reference here is to the number of elements.
Also, is it possible for older versions to have mesh elements to be changed.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top