Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] HFSS interdigital Cavity Filter Question

Status
Not open for further replies.

eoncu

Junior Member level 1
Joined
Feb 18, 2009
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,392
Hello,
i am trying to simulate a cavity interdigital bandpass filter.But there are several errors.And i couldnt solve them.The error messages are as follows:"firstelement and Box1 intersect","secondelement and Box1 intersect".
How can i solve this problem?Box1 is a box that is air.and i am trying to feed the filter by connector.Firstelement and secondelement is the connectors.How cant they intersect?it seems unlogical to me.Can anyone help?
thnks in advance...
 

tallface65

Full Member level 6
Joined
Dec 8, 2009
Messages
345
Helped
189
Reputation
392
Reaction score
173
Trophy points
1,323
Location
land of the free
Activity points
3,407
In HFSS13, go to HFSS->Design Settings and enable material over ride. This will have HFSS have all metal objects to take precedence in regions of intersection with dielectrics

Have Fun
 

eoncu

Junior Member level 1
Joined
Feb 18, 2009
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,392
In HFSS13, go to HFSS->Design Settings and enable material over ride. This will have HFSS have all metal objects to take precedence in regions of intersection with dielectrics

Have Fun
hi,thnk u very much for ur reply.i am using HFSS10 .i coulnt find design setting under HFSS.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top