Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS: how to use symmetry planes? (microstrip array)

Status
Not open for further replies.
S

sadeghi85

Newbie level 3
Joined
Dec 13, 2006
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
Hi

I want to simulate 16x1 microstrip array antenna with corporate feed designed for -30db SLL(Chebyshev) at 2.3GHz, but with 2GB RAM, I can't run it. now (apparently) the only way is to rework the model and to use symmetry planes. I attached the project file, if anyone can modify it to use symmetry plane, or tell me how to use symmetry planes( or any other way that makes my system able to analyze this), I'll greatly appreciate it.
 

I'd be interested in knowing this as well.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top