Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[HFSS] Can anybody help me out? about GBN, SSN simulation

Status
Not open for further replies.

shavete

Newbie level 3
Joined
Sep 2, 2005
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,307
Re: [HFSS] Can anybody help me out? about GBN, SSN simulatio

I'd like to know how to simulate this kind of model in HFSS.
Of course you can refer the paper linked in reply.

And the author(Kamgaing) describe the simulation model as the parallel plate(10cmX10cmX0.4m) with noise source. And the noise sources will be the ports.
The ports will be located somewhere between the plates.

And the result displays the s-parameters S11, S21

Can anybody know how to simulate this kind of structure?
How to feed the source, in other words, how to put the ports in the parallel
plate.

Help me please~

Added after 2 minutes:

here is the paper from page 1 to page 5
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top