Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help with using RS encoder in Simulink

Status
Not open for further replies.

haneet

Full Member level 3
Joined
Nov 7, 2006
Messages
160
Helped
14
Reputation
28
Reaction score
1
Trophy points
1,298
Activity points
2,219
hi guyz..

i am trying to run a block diagram on simulink and in that i need to use this RS encoder which i could pick but then i get som eerror which states:

Error reported by S-function 'scominttobit' in 'untitled/Binary-Input RS Encoder/Bit to Integer Converter':
In case of frame-based inputs, the input must be a column vector whose width is an integer multiple of the number of bits per integer.

you can find the block diagram in the attachement

thanks,

Haneet
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top