Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] help with mikroC compiler

Status
Not open for further replies.
B

brew

Member level 3
Joined
Mar 4, 2011
Messages
59
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,693
i am using mikroC compiler. after building the code that i made, it shows error from the pic16f88.h file that i downloaded. i don't know what to do since from what i know of, .h pic files are just default files coming from microchip.com.

-regards brew
 

the header file exists in the folder because i saved it in it. as for the snapshot ill post it.
 

Code: 
// HEADER FILE
#if !defined ICD_DEBUG  &&  !defined ICD2_DEBUG
 #pragma chip PIC16F88, core 14, code 4096, ram 32 : 0x1FF

#elif defined ICD2_DEBUG
 #pragma chip PIC16F88, core 14, code 0xF00, ram 32 : 0x1FF
 // last 256 locations are reserved for debugging

 //RESERVED RAM LOCATIONS
 char ICD2R1 @ 0x70;
 char reservedICD2[9] @ 0x1E7;  // reserved RAM for ICD2

 #pragma stackLevels 7   // reserve one level for debugging

#else  /* ICD_DEBUG */
 #pragma chip PIC16F88, core 14, code 0xF00, ram 32 : 0x1FF
 // NOTE: last 256 locations are reserved for debugging

 //RESERVED RAM LOCATIONS FOR DEBUGGING
 #pragma char ICDR1 @ 0x70
 #pragma char ICDR2 @ 0x1EB
 #pragma char ICDR3 @ 0x1EC
 #pragma char ICDR4 @ 0x1ED
 #pragma char ICDR5 @ 0x1EE
 #pragma char ICDR6 @ 0x1EF

 #pragma stackLevels 7   // reserve one level for debugging

 #pragma cdata[0] = /*NOP*/ 0x0000  // startup instruction
 #pragma resetVector 1    // change to address 1

#endif

#pragma ramdef 0x110 : 0x11F
#pragma ramdef 0x190 : 0x19F
#pragma ramdef  0x70 : 0x7F mapped_into_all_banks

#define INT_gen_style
#define INT_rambank  0   /* interrupt variables in bank 0 */

#pragma config_def 0x1118

#pragma wideConstData

#pragma config_reg2 0x2008

/* Predefined:
  char W;
  char INDF, TMR0, PCL, STATUS, FSR, PORTA, PORTB;
  char OPTION, TRISA, TRISB;
  char PCLATH, INTCON;
  bit PS0, PS1, PS2, PSA, T0SE, T0CS, INTEDG, RBPU_;
  bit Carry, DC, Zero_, PD, TO, RP0, RP1, IRP;
  bit RBIF, INTF, T0IF, RBIE, INTE, T0IE, GIE;
  bit PA0, PA1;  // PCLATH
*/

#pragma char PIR1    @ 0x0C
#pragma char PIR2    @ 0x0D
#pragma char TMR1L   @ 0x0E
#pragma char TMR1H   @ 0x0F
#pragma char T1CON   @ 0x10
#pragma char TMR2    @ 0x11
#pragma char T2CON   @ 0x12
#pragma char SSPBUF  @ 0x13
#pragma char SSPCON  @ 0x14
#pragma char CCPR1L  @ 0x15
#pragma char CCPR1H  @ 0x16
#pragma char CCP1CON @ 0x17
#pragma char RCSTA   @ 0x18
#pragma char TXREG   @ 0x19
#pragma char RCREG   @ 0x1A

#pragma char ADRESH  @ 0x1E
#pragma char ADCON0  @ 0x1F

#pragma char PIE1    @ 0x8C
#pragma char PIE2    @ 0x8D
#pragma char PCON    @ 0x8E
#pragma char OSCCON  @ 0x8F
#pragma char OSCTUNE @ 0x90

#pragma char PR2     @ 0x92
#pragma char SSPADD  @ 0x93
#pragma char SSPSTAT @ 0x94

#pragma char TXSTA   @ 0x98
#pragma char SPBRG   @ 0x99

#pragma char ANSEL   @ 0x9B
#pragma char CMCON   @ 0x9C
#pragma char CVRCON  @ 0x9D
#pragma char ADRESL  @ 0x9E
#pragma char ADCON1  @ 0x9F

#pragma char WDTCON  @ 0x105

#pragma char EEDATA  @ 0x10C
#pragma char EEADR   @ 0x10D
#pragma char EEDATH  @ 0x10E
#pragma char EEADRH  @ 0x10F

#pragma char EECON1  @ 0x18C
#pragma char EECON2  @ 0x18D


#pragma bit  INT0IF  @ INTCON.1
#pragma bit  TMR0IF  @ INTCON.2
#pragma bit  INT0IE  @ INTCON.4
#pragma bit  TMR0IE  @ INTCON.5
#pragma bit  PEIE    @ INTCON.6

#pragma bit  TMR1IF  @ PIR1.0
#pragma bit  TMR2IF  @ PIR1.1
#pragma bit  CCP1IF  @ PIR1.2
#pragma bit  SSPIF   @ PIR1.3
#pragma bit  TXIF    @ PIR1.4
#pragma bit  RCIF    @ PIR1.5
#pragma bit  ADIF    @ PIR1.6

#pragma bit  EEIF    @ PIR2.4
#pragma bit  CMIF    @ PIR2.6
#pragma bit  OSFIF   @ PIR2.7

#pragma bit  TMR1ON  @ T1CON.0
#pragma bit  TMR1CS  @ T1CON.1
#pragma bit  T1SYNC_ @ T1CON.2
#pragma bit  T1OSCEN @ T1CON.3
#pragma bit  T1CKPS0 @ T1CON.4
#pragma bit  T1CKPS1 @ T1CON.5
#pragma bit  T1RUN   @ T1CON.6

#pragma bit  T2CKPS0 @ T2CON.0
#pragma bit  T2CKPS1 @ T2CON.1
#pragma bit  TMR2ON  @ T2CON.2
#pragma bit  TOUTPS0 @ T2CON.3
#pragma bit  TOUTPS1 @ T2CON.4
#pragma bit  TOUTPS2 @ T2CON.5
#pragma bit  TOUTPS3 @ T2CON.6

#pragma bit  SSPM0   @ SSPCON.0
#pragma bit  SSPM1   @ SSPCON.1
#pragma bit  SSPM2   @ SSPCON.2
#pragma bit  SSPM3   @ SSPCON.3
#pragma bit  CKP     @ SSPCON.4
#pragma bit  SSPEN   @ SSPCON.5
#pragma bit  SSPOV   @ SSPCON.6
#pragma bit  WCOL    @ SSPCON.7

#pragma bit  CCP1M0  @ CCP1CON.0
#pragma bit  CCP1M1  @ CCP1CON.1
#pragma bit  CCP1M2  @ CCP1CON.2
#pragma bit  CCP1M3  @ CCP1CON.3
#pragma bit  CCP1Y   @ CCP1CON.4
#pragma bit  CCP1X   @ CCP1CON.5

#pragma bit  RX9D    @ RCSTA.0
#pragma bit  OERR    @ RCSTA.1
#pragma bit  FERR    @ RCSTA.2
#pragma bit  ADDEN   @ RCSTA.3
#pragma bit  CREN    @ RCSTA.4
#pragma bit  SREN    @ RCSTA.5
#pragma bit  RX9     @ RCSTA.6
#pragma bit  SPEN    @ RCSTA.7

#pragma bit  ADON    @ ADCON0.0
#pragma bit  GO      @ ADCON0.2
#pragma bit  CHS0    @ ADCON0.3
#pragma bit  CHS1    @ ADCON0.4
#pragma bit  CHS2    @ ADCON0.5
#pragma bit  ADCS0   @ ADCON0.6
#pragma bit  ADCS1   @ ADCON0.7

#pragma bit  TMR1IE  @ PIE1.0
#pragma bit  TMR2IE  @ PIE1.1
#pragma bit  CCP1IE  @ PIE1.2
#pragma bit  SSPIE   @ PIE1.3
#pragma bit  TXIE    @ PIE1.4
#pragma bit  RCIE    @ PIE1.5
#pragma bit  ADIE    @ PIE1.6

#pragma bit  EEIE    @ PIE2.4
#pragma bit  CMIE    @ PIE2.6
#pragma bit  OSFIE   @ PIE2.7

#pragma bit  BOR_    @ PCON.0
#pragma bit  POR_    @ PCON.1

#pragma bit  BF      @ SSPSTAT.0
#pragma bit  UA      @ SSPSTAT.1
#pragma bit  RW_     @ SSPSTAT.2
#pragma bit  S       @ SSPSTAT.3
#pragma bit  P       @ SSPSTAT.4
#pragma bit  DA_     @ SSPSTAT.5
#pragma bit  CKE     @ SSPSTAT.6
#pragma bit  SMP     @ SSPSTAT.7

#pragma bit  TX9D    @ TXSTA.0
#pragma bit  TRMT    @ TXSTA.1
#pragma bit  BRGH    @ TXSTA.2
#pragma bit  SYNC    @ TXSTA.4
#pragma bit  TXEN    @ TXSTA.5
#pragma bit  TX9     @ TXSTA.6
#pragma bit  CSRC    @ TXSTA.7

#pragma bit  CM0     @ CMCON.0
#pragma bit  CM1     @ CMCON.1
#pragma bit  CM2     @ CMCON.2
#pragma bit  CIS     @ CMCON.3
#pragma bit  C1INV   @ CMCON.4
#pragma bit  C2INV   @ CMCON.5
#pragma bit  C1OUT   @ CMCON.6
#pragma bit  C2OUT   @ CMCON.7

#pragma bit  CVR0    @ CVRCON.0
#pragma bit  CVR1    @ CVRCON.1
#pragma bit  CVR2    @ CVRCON.2
#pragma bit  CVR3    @ CVRCON.3
#pragma bit  CVRR    @ CVRCON.5
#pragma bit  CVROE   @ CVRCON.6
#pragma bit  CVREN   @ CVRCON.7

#pragma bit  VCFG0   @ ADCON1.4
#pragma bit  VCFG1   @ ADCON1.5
#pragma bit  ADCS2   @ ADCON1.6
#pragma bit  ADFM    @ ADCON1.7

#pragma bit  SWDTEN  @ WDTCON.0

#pragma bit  RD      @ EECON1.0
#pragma bit  WR      @ EECON1.1
#pragma bit  WREN    @ EECON1.2
#pragma bit  WRERR   @ EECON1.3
#pragma bit  FREE    @ EECON1.4
#pragma bit  EEPGD   @ EECON1.7

please copy this code into text file as save as 16f88.h and add it to your project and try again...

there seems to be some problem in your header file.
 
thanks, it works. but where did you get your header file?
 

all the pic header files are available in this site....

**broken link removed**

will look into your header file later and correct the error...
 
sir, one more thiiiing. :)

OSCCON = 0b.0111.0000; //Setup internal oscillator for 8MHz
while(OSCCON.2 == 0); //Wait for frequency to stabilize
ANSEL = 0b.0000.0000; //Turn pins to Digital instead of Analog
CMCON = 0b.0000.0111; //Turn off comparator on RA port
PORTA = 0b.0000.0000;
TRISA = 0b.1111.1111; //0 = Output, 1 = Input

PORTB = 0b.0000.0000;
TRISB = 0b.0000.0010; //0 = Output, 1 = Input (RX is an input)

i have this in my code...is this syntax "OSCCON = 0b.0111.0000;" equal to "OSCCON = 0x70"?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top