Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help with learning manual about different block types

yefj

Advanced Member level 5
Advanced Member level 5
Joined
Sep 12, 2019
Messages
1,682
Helped
1
Reputation
2
Reaction score
5
Trophy points
38
Activity points
10,232
Hello, I want to learn about different block types in vivado fpga.
dma gpio dac etc..
Is the some good manual you could reccomend (video is the best)
where I could learn about these block in vivado how they function and how they are being implement in vivado?
Thanks.

1749486880620.png
 
What you refer to here as blocks are IP cores offered by AMD.
If you want to learn about then read the ProductGuide (PG*) that comes for these IP cores. Aditionally these PGs have an Example_Design section, which provides a guide to run a simulation for the IP cores. That is a good source of learning.
 

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top