Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Help]Water Show Design - exlanation needed

Status
Not open for further replies.
N

Nasty Shinta

Newbie level 4
Joined
Jul 4, 2008
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
[Help]Water Show Design

hello guys,
ive seen this video on youtube and it does really makes me curious on how it was developed. i know it was programmed using PLC but can someone explain it to me clearly?? on how things work, what kind of PLC was used and the line pressure used.how did they compute the ms of closing/opening of valves... thanks in advance.


heres the link.
https://www.youtube.com/watch?v=w1v3umUEAXY
 

[Help]Water Show Design

Any PLC and almost any servo would work fine. Relatoion ship between psi and flow is square root. Calculate max flow then you know how to spec your pump. Choose correct pipe size based on flow rates and number of bends etc and where your holes are. probably want prvs around to keep the flows even.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top