jhon.c
Newbie level 6
Hi !!
I am now in the investigation phase for my project
Our team works in signal processing based on altera FPGA
for the time been we use a raw data that we get from a database.
Now we want to get our real data by using Micaz platform
we use the MPR2600 from crossbow as mote (1) and MIB520 usb programming interface to program the motes.
I want to use a second mote(2) and interface it with altera FPGA to receive the data gathered from mote(1)
to be processed with FPGA and after that the result will be transmitted wirelessly to the network using the same mote(2).
I am asking if somebody already did this work (the interfacing part with the FPGA) and what kind of board I can use as support for mote(2) to be plugged on the FPGA,
my FPGA has only an Ethernet port.
Please any comments or documentations will be appreciated.
Thanks.
I am now in the investigation phase for my project
Our team works in signal processing based on altera FPGA
for the time been we use a raw data that we get from a database.
Now we want to get our real data by using Micaz platform
we use the MPR2600 from crossbow as mote (1) and MIB520 usb programming interface to program the motes.
I want to use a second mote(2) and interface it with altera FPGA to receive the data gathered from mote(1)
to be processed with FPGA and after that the result will be transmitted wirelessly to the network using the same mote(2).
I am asking if somebody already did this work (the interfacing part with the FPGA) and what kind of board I can use as support for mote(2) to be plugged on the FPGA,
my FPGA has only an Ethernet port.
Please any comments or documentations will be appreciated.
Thanks.
