Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help regarding surface mount socket

Status
Not open for further replies.

srivatsan

Full Member level 3
Joined
Aug 4, 2004
Messages
186
Helped
8
Reputation
16
Reaction score
4
Trophy points
1,298
Activity points
2,077
hi,
currently i need to verify my analog circuit (which is fabricated on a chip) on a breadboard. unfortunately, the chip is surface mount config. i really have no idea how to get a socket to mount it on the breadboard. I am not worried about the frequency effects or parasitic effects.
if any person knows:
1. what is the socket name or brand name?
2.where to buy: like radio shack or EPO or ACE electronics, etc...?
I would realy appreciate the help..
thanks
regards
- vats
 

Delsian

Junior Member level 1
Joined
Jan 13, 2004
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Ukraine
Activity points
122
I made simple connector to SMD components from old connector with spring lamels. Break any unuseful connector and take bronze lamels. You will glue it with silicon to board, and after programming you can easy remove it manually. Also you got ugly connector for future use :)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top