Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help regarding jdm programmer .

Status
Not open for further replies.

mobashir

Newbie level 3
Joined
Aug 4, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,361
Hi

i cant connect my jdm pro. With pc using serial to usb cable please help on how to connect it with pc step by step as i am new to this.. IMAG0031.jpg
 

With USB to serial converters you cant use jdm programmers. (usb to serial or parallel adapters are mostly designed to work for printers)

Try programmers using usb connection itself.
 

With USB to serial converters you cant use jdm programmers. (usb to serial or parallel adapters are mostly designed to work for printers)

Try programmers using usb connection itself.

can u tell a simple way.........if i can use sme hardware..........
 

Did you set and install drivers for converter (if needed) ? From picture I think you have FTD Chip.
 

Did you try that cable with other devices ?

Did you try that cable on other PC with programmer ?
 

I had tried a few usb converters and nothing worked for jdm programmer but works fine for others

try out pickit which uses usb for communication
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top