Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[help]Problem of cadence ic5141 on fedora4

Status
Not open for further replies.

perylee_sh

Newbie level 6
Joined
Mar 20, 2006
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,359
cadence icfb cant open ciw

I install cadence ic5141 on fedora4 with no errors using a old version tar tool .But following error message show in the terminal when I start "icfb".

Loading "/tools/cadence5141/tools.lnx86/lib/libgdmtdm_sh.so" has failed.
Error (dlopen): "/tools/cadence5141/tools/lib/libvirtuos_sh.so: cannot restore segment prot after reloc: Permission denied
Error (gdmiLoadDMLibrary): Could not load library './libgdmtdm_sh.so' for DM system 'tdm'
Error (gdmImportDMSystem): DM system 'tdm' as specified in file '' is
not available due to errors.

I can not open LibManager in CIW. I am not sure whether ic5141 can run fedora4.
Can someone help me to solve this problem? Thanks.
 

cadence ic5141 permission denied on library

I don't know the cause of this error but i run cadence IC5141 on FC4 and i don't get this error
 
cadence tdm

For FC4, you have to disable the SElinux file in order to get rid of all these errors.

The file is located in:
/etc/sysconfig/selinux

make sure you set the option to disable and then reboot your computer.

Let me know how it works out.
 

    perylee_sh

    Points: 2
    Helpful Answer Positive Rating
selinux dlopen fail

Dear Analogworld
Please tell me how to disable the SElinux file and how to
set the option in detail.
Thanks
 

gdmimportdmsystem

In gnome,
you may try to the following steps to disable SeLinux.

Desktop -> System Settings -> Security Level -> SELinux

You can disable the SELinux in this window.
I hope it can help you.
 

    perylee_sh

    Points: 2
    Helpful Answer Positive Rating
gdmiloaddmlibrary

Ic5141 can work very well after I disable the SELinux in
fedora4 just following that Analogworld and llh219 have
told me. Thank you very much!!:D
 

cadence disable tdm

perylee_sh said:
I install cadence ic5141 on fedora4 with no errors using a old version tar tool .But following error message show in the terminal when I start "icfb".

Loading "/tools/cadence5141/tools.lnx86/lib/libgdmtdm_sh.so" has failed.
Error (dlopen): "/tools/cadence5141/tools/lib/libvirtuos_sh.so: cannot restore segment prot after reloc: Permission denied
Error (gdmiLoadDMLibrary): Could not load library './libgdmtdm_sh.so' for DM system 'tdm'
Error (gdmImportDMSystem): DM system 'tdm' as specified in file '' is
not available due to errors.

I can not open LibManager in CIW. I am not sure whether ic5141 can run fedora4.
Can someone help me to solve this problem? Thanks.
hello,
can u please specify what u mean by old version tar tool?
thnx
a.safwat
 

libmanager not opening cadence

safwatonline
you can use tar-1.13.25-11.i386.rpm in fedora4
in order to install ic5141. It can be fount on redhat9.0
install CD.
good luck.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top