Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help:not annotated nets in Prime Time

Status
Not open for further replies.

risccpu

Junior Member level 2
Joined
Oct 21, 2005
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,421
Could anyone tell me why the list number of not annotated is smaller than the total not annotated number? I use "report_annotated_parasitics -max_nets 100 -list_not_annotated". For example, the report is as following:
1. net1
2. net2
3. net3
4. net4
5. net5

******************************
report: annotated_parasitics
-list_not_annotated
******************************

| | | RC | Not |
Pin type | Total | RC pi | network |Annotated|
--------------------+---------+---------+---------+---------+
Internal nets | 23649 | 0 | 23639 | 10 |
--------------------+---------+---------+---------+---------+
Boundary/port nets| 34 | 0 | 34 | 0 |
--------------------+---------+---------+---------+---------+
| 23683 | 0 | 23681 | 10|
So there are only 5 nets showed verbosely, what are the other 5 nets?

Best Regards,
risccpu
 

xworld2008

Full Member level 4
Joined
Dec 13, 2002
Messages
231
Helped
18
Reputation
36
Reaction score
14
Trophy points
1,298
Activity points
1,801
Where you get the netlist, from dc out or P&r tools out?
 

risccpu

Junior Member level 2
Joined
Oct 21, 2005
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,421
From P&r tools out.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top