Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help needed regarding AT Command M95

Status
Not open for further replies.
A

angy

Full Member level 3
Full Member level 3
Joined
Jul 9, 2008
Messages
151
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Visit site
Activity points
2,341
I was running the M95 GSM module (qucetel) interfaced with LPC 2132 and i am stuck with repetitions of following line
+COPS: 0,0,"Spice Telecom" .Can anyone help what is the cause
Below is the sequence of At commands right from power start

AT+COPS?
+COPS: 0,0,"Spice Telecom"

OK
AT+CMGF=1
OK

OK

OK
404149450063790
404149450063790
404149450063790
404149450063790
404149450063790
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS: 0,0,"Spice Telecom"
+COPS:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top