Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help needed on pc to pc fibre optics communication

Status
Not open for further replies.

iambiz

Newbie level 3
Joined
Oct 13, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
pls i need accurate circuit diagrams and technical know how to build a transmitter and receiver circuit for pc to pc fibre communication asap:???::???:
 

enjunear

Advanced Member level 3
Joined
Dec 21, 2010
Messages
960
Helped
309
Reputation
618
Reaction score
303
Trophy points
1,343
Location
USA, midwest
Activity points
9,749
Buy pre-built modules that interface directly to the PC via PCI, PCI-E, USB or Firewire. Building fiber transceivers from scratch could be a very long development cycle (read: months).
 

iambiz

Newbie level 3
Joined
Oct 13, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
Buy pre-built modules that interface directly to the PC via PCI, PCI-E, USB or Firewire. Building fiber transceivers from scratch could be a very long development cycle (read: months).



10kz 4 replying my earlier post...but i need advice on how to perform a final year project on pc to pc fibre communication asap...your reply is highly anticipated

---------- Post added at 20:05 ---------- Previous post was at 19:59 ----------

please i still need circuit diagrams cause this is my final year project....how do i attach fibre cable to the receiver and transmitter circuit
 

enjunear

Advanced Member level 3
Joined
Dec 21, 2010
Messages
960
Helped
309
Reputation
618
Reaction score
303
Trophy points
1,343
Location
USA, midwest
Activity points
9,749
10kz 4 replying my earlier post...but i need advice on how to perform a final year project on pc to pc fibre communication asap...your reply is highly anticipated

---------- Post added at 20:05 ---------- Previous post was at 19:59 ----------

please i still need circuit diagrams cause this is my final year project....how do i attach fibre cable to the receiver and transmitter circuit

Google is your friend... you should try it some time: click here to see what I found

1 Gb/s Fiber Optic Transmitter Design using Intersil Digitally Controlled Potentiometer (XDCP®) ICs
https://www.intersil.com/data/an/an140.pdf
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top