Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help needed in PA design

Status
Not open for further replies.
khouly

khouly

Advanced Member level 5
Joined
Oct 20, 2003
Messages
2,350
Helped
461
Reputation
916
Reaction score
101
Trophy points
1,343
Location
EGYPT
Activity points
13,242
i have 2 design a PA using the SLD-2083CZ from sirenza
they provide the loadpull data , and the sparamters , but not the nonlinear model

is that is al i need , to desing the PA , just use the bias point they spicifiy in the load pull and design the matching circuits for the impedance point and i am done

or there is somehting else

also can any one share the nonlieanr model of this LDMOS ,

thanks for ur help

khouly
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top