Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help need to adjust the vertical height of samsung sct11c tv

Status
Not open for further replies.

westly_gulay

Newbie level 1
Joined
Aug 28, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
philippines
Activity points
1,287
Help need service mode

Any body wants to help me how to adjust the vertical height of this tv set,samsung sct11c chassis,im a new commer from philippines, thanks in advance
 

Re: Help need service mode

in first check the power supply
 

Re: Help need service mode

The vertical height problem can only come from the electrolytic capacitors around the vertical circuit .You have to change all of them !.Also i commun to the vertial IC to get damaged because of the capacitors that i mentionned .So baciaclly change it too. You want to star to trace back the power supply line for the vertical IC .Is powered by the flyback .Most of the times there is a small value resistor .When the IC goes into short circuit this resistor also gets open .So check it too
.If you don't have a total collapse of the vertical .Then the problem are just th capacitors as i indicated .The vertical circuit is about to go into short circuit .To prevent it ,just replace those capacitors i said!

regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top