Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP, need help in Microwave oven modification...

Status
Not open for further replies.
R

ramjeng

Newbie level 4
Joined
Aug 4, 2009
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Manila
Activity points
1,330
Can anybody help me or give me any advice on microwave ovens? We have to modify a microwave for our thesis, this involves making holes in them. I hope someone could refer me to a person or help give me a lot of advice about this. We all know that a Microwave oven isn't one of the cheaper things in life, I don't want to make a mistake in this, can anyone help me?

Thanks,(",)
 

Why are you trying to put holes in it? It is set up as a wave guide load if you effect this mode you might present an high vswr to the magnetron and blow it out. if you are just trying to get access to the radiation I would suggest that you fashion a wave guide to coax feed from the magnetron.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top