ittefaq11
Member level 5
I am using the phillips hitag HTRC110 chip as a RFID read/write chip and i have interfaced this with an AT89C51 microcontroller. . I have the C- Code for Hitag 2 system from phillips. However it is very difficult to understand..
I AM USING IT ONLY FOR READ MODE . i khow fr0m the datasheets , how to interface htrc110 with 8051
THE PROBLEM IS WHAT TO WRITE IN CODE FOR HTRC110 AND HOW TO USE THE LIBRARY
If you have any knowledge of programming the microcontroller for this chip DEN PLZ HELP ME
i need some help urgently
IF ANY MORE INFO IS NEEDED THEN PLZ POST HERE
thanks a lot
I AM USING IT ONLY FOR READ MODE . i khow fr0m the datasheets , how to interface htrc110 with 8051
THE PROBLEM IS WHAT TO WRITE IN CODE FOR HTRC110 AND HOW TO USE THE LIBRARY
If you have any knowledge of programming the microcontroller for this chip DEN PLZ HELP ME
i need some help urgently
IF ANY MORE INFO IS NEEDED THEN PLZ POST HERE
thanks a lot