Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me write a code for HTRC110 interfacing with 8051

Status
Not open for further replies.
I

ittefaq11

Member level 5
Joined
Sep 14, 2006
Messages
80
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,665
I am using the phillips hitag HTRC110 chip as a RFID read/write chip and i have interfaced this with an AT89C51 microcontroller. . I have the C- Code for Hitag 2 system from phillips. However it is very difficult to understand..
I AM USING IT ONLY FOR READ MODE . i khow fr0m the datasheets , how to interface htrc110 with 8051
THE PROBLEM IS WHAT TO WRITE IN CODE FOR HTRC110 AND HOW TO USE THE LIBRARY
If you have any knowledge of programming the microcontroller for this chip DEN PLZ HELP ME
i need some help urgently
IF ANY MORE INFO IS NEEDED THEN PLZ POST HERE
thanks a lot
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top