Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me with schematic or code for a PIC based bike alarm

Status
Not open for further replies.

dimitris176

Newbie level 2
Joined
Apr 28, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
gr
Activity points
1,299
hello to everybody
i have a problem with my summer scool
i have to design a project
may it is simple but i am new in pic controllers
do you have any schematics,hex codes like this?
the project is a bike alarm as follow:
a)ARMING THE ALARM
when input A go HI then output A blinking 3 times (flashes)
and the alarm is armed after 5 sec
b)ALARM
when input B go HI,then output B go HI for 20 sec (alarm)
output C go HI and stay HI to indicate the alarm was alarmed
output D is blinking for 20 sec
and output E outputing 1000 to 2000 herz as siren sound for 20 sec
then stop and resset for a new cycle but output C remain HI to indicate that the alarm was triggered
DISARMING THE ALARM
when input A go LOW the alarm disarmed
and output A blink 1 time
then output C if was HI now go LOW
IF YOU HAVE ANY SIMILAR PROJECT PLEASE INFORM ME
THANKS:D
 

Re: pic bike alarm

dimitris176 said:
hello to everybody
i have a problem with my summer scool
i have to design a project
may it is simple but i am new in pic controllers
do you have any schematics,hex codes like this?
the project is a bike alarm as follow:
a)ARMING THE ALARM
when input A go HI then output A blinking 3 times (flashes)
and the alarm is armed after 5 sec
b)ALARM
when input B go HI,then output B go HI for 20 sec (alarm)
output C go HI and stay HI to indicate the alarm was alarmed
output D is blinking for 20 sec
and output E outputing 1000 to 2000 herz as siren sound for 20 sec
then stop and resset for a new cycle but output C remain HI to indicate that the alarm was triggered
DISARMING THE ALARM
when input A go LOW the alarm disarmed
and output A blink 1 time
then output C if was HI now go LOW
IF YOU HAVE ANY SIMILAR PROJECT PLEASE INFORM ME
THANKS:D

If you wanna design a custom made project for you, with all the given requirements, post your querry in "Bussiness intrest special group" section and too remember tto mention you budget for that.
Cheers
 

Re: pic bike alarm

hi and thanks
i only asked if there is something simillar
not exactly the same
i have found some schematics from another forum and i ll try with them
the net is full of such projects
anyway i apreciate your answer
have a good day
jim

Added after 19 minutes:

dear hammids1
i know that pakistan guys are very well educated in microcontrollers and they have special skills
thanks anyway
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top