Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me with phase locked loop simulation in Spice

Status
Not open for further replies.

akbar24

Newbie level 2
Joined
Nov 21, 2004
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
16
Spice question

I am trying to simulate a Phase Locked Loop in spice. I have created all the nodes and placed all the transistor, resister, etc. into the simulator. I am using the same setup as what is found on the spec sheet of the LM565 (pg 7 - top). I also don't have the multiplier in the cct. So pin 4 and 5 are shorted together, just to see if it works.

Any ideas?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top