Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with my control unit..

Status
Not open for further replies.
K

kokei74

Junior Member level 3
Joined
Apr 2, 2008
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,528
im doing a matrix multiplier, block diagram of the system is like above.



x1 x2 x3 y1 y2 y3 z1 z2 z3
x4 x5 x6 x y4 y5 y6 = z4 z5 z6
x7 x8 x9 y7 y8 y9 z7 z8 z9

z1 = (x1y1+x2y4+x3y2)
. .
. .

For data x1 to x9 will be read at ROM1
For data y1 to y9 will be read at ROM2
The resulted matrix will be write at RAM

i need help with my Control Unit coding where it will do this operation. Can anyone help me with the coding in VHDL?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top