Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me with implementing a BFSK demodulator on FPGA

Status
Not open for further replies.

Vonn

Full Member level 4
Joined
Oct 6, 2002
Messages
230
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
2,458
Asking for help in FSK

Hi all ,
I want to implement an bfsk demodulator on FPGA but i don't want to choos any parameters ... i want to find a real application and try to make it as fpga- based ... i thought about Calle ID but i faced a problem ...
as the baud rate 1200 and F1= 1200 and F2=2200 they are not orthogonals and i don't know how to avoid phase shift ?
If you know any other applicatio plz tell me
Thanks
 

Hi Geni,

Which is your sampling frequency?
Try to use a look-up table.


Bye
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top