Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with changing cable in a hedge trimmer

Status
Not open for further replies.

patchquinn

Junior Member level 1
Joined
Jan 7, 2003
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
ireland
Activity points
163
witin codes

Hi, Am putting a new cable on a black and decker hedge trimmer. But am not sure what wires are to connect to what. There is a two input connector which was wirred to hte old cable which a freind removed but cant remember what wires were connected to what. The hedge trimmer has red, black and grey internal wires.and the red and black seem to want to be connected to only one wire. THe cord has two wires blue and brown, brown is live and blue neutral I know. AM not sure what wires to connect to what. Which wires do I connect to the brown and which to the blue. know red is live and black is ground in a dc system but this is the mains.....advice would be appreciated....
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top