Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help me with broadband phase shifter and power divider, 3ks

Status
Not open for further replies.

fushq

Newbie level 4
Joined
Nov 15, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,327
broad band phase shifter

i need a wide-band power divider.
1 port to 4 port with equal amplitude and 90 degree phase shift between each other.
frequency from 1.1GHz~1.6GHz.
Can anybody give me some suggestions?
i'll appreciate that, 3ks all
 

check anaren 90degree hybrid coupler XC1400P-03S, it's working very good.
 

thanks zhlc3
XC1400P-03S is a 3dB power divider. it's complicated to use two to realise 4 ports equal power assignment.
any other suggestion?
 

Re: help me with broadband phase shifter and power divider,

You should be able to design this on PCB and get around a 5% reflection coefficient no problem
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top