Help me make a power supply for a 120W RMS amplifier

Status
Not open for further replies.
Re: Amplifier 120W RMS

You need a power supply? Then you must tell us what is the voltage.

regards

Necolei
 

Re: Amplifier 120W RMS

I guess that he needs Vs=24V according to the schematic... I dont have any power supply schematic at the moment that is suitable for this... By tomorow I can find it, I think...
 

Re: Amplifier 120W RMS

The power supply for a power amplifier does not have to be to sophisticated . The correct secondry voltage and current from the transformer a resonably sized bridge rectifier ( possibly 2) and plenty of smoothing say 10,000uf for each 100watts of power
 

Re: Amplifier 120W RMS

what is the type (class A, class AB etc) of your amplifier ? depending on the same, the efficiency will vary and you will need a diffeernt design.
 

Re: Amplifier 120W RMS

hi joseafonso88,

if the rms power of the design is 120W, driving an 8Ohm speaker then you

need about 40-45 V of supply. you can look for a simple power supply in

electronics-lab.com.

good luck,

nhoj
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…