Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me interface PocketPC to AVR through IrDA

Status
Not open for further replies.
J

Jaannee

Junior Member level 3
Joined
Dec 31, 1999
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
255
IrDA - again...

Hi,
I have searched the forum but did not find what I needed. I want to interface a Pocket-PC to an AVR through IrDA on the lowest level (raw IR).
I have it allmost running, but a leading zero followed by a couple of ones at the start kicks the UART in the AVR out of synk. I know that I could start the UART after the first zero, but I have a similar problem at the Pocket-PC end as well. Correct reception is very dependant on the data sent. So there is something strange going on...

I use Vishay IrDA transceiver and endec for pulse-shaping, so that should work fine. I think the problem lies in the Pocket-PC end of things...

Any clues?

Thanks

Janne
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top